Jingye Nose Pump 3 - pump 3000l/h

Nose Pump advantages:
- quiet operation
- high efficiency and lift height
- for continuous operation 24/7
- ceramic shaft
- connector set
- two interchangeable "noses"
- operation in full submersion
- operation in shallow submersion
- operation out of water

Why does the pump have a nose?
Thanks to the attachment, commonly referred to as a "nose," the pump draws water from the nearest vicinity of the tank's bottom. This makes it a low (shallow) submersion pump, meaning that only a few centimeters of water are needed for operation.

Big and small nose:
In the set, you will find two types of noses. The big nose draws water only from the bottom of the tank and has a filter grid that prevents the pump from being blocked by larger elements like stones.
The smaller nose can draw water from any direction, 360 degrees. This significantly facilitates the positioning of the pump in small tanks such as sumps.

What can the pump be used for:
First and foremost, it is designed for use in marine tanks. In the sump, the pump with a nose becomes indispensable.
Additionally, it can be used for:
- marine and freshwater aquarium sumps
- garden ponds
- pools for sediment removal
- aquaristics as a water change pump
- technical and hydraulic devices and installations

Operation in full submersion and out of water:
The pump can operate completely submerged in water. Additionally, thanks to the connectors in the set, you can install the pump outside of the water, directly connected to the inlet and outlet hoses.

Ceramic shaft:
This is essential for marine aquaristics. Of course, it also performs excellently in freshwater. The ceramic shaft will never rust. Moreover, it does not heat up, does not change its volume, ensuring quiet operation.

What is included in the set:
- pump with a capacity of 3000l/h
- two "nose" attachments
- two outlet connectors with an outer diameter of 16mm and 20mm for hoses
- inlet connector with an outer diameter of 20mm
- gasket for the outlet connector - already installed
- gasket for the inlet connector if you want to swap it for a nose
- 4 x suction cups
- product packaging
- instruction manual PL

Technical data:
- capacity: 3000l/h
- power consumption: 60W
- water lift height: 3.2m
- maximum dimensions (with the largest nose and connector on top of the pump): 17x12x17cm
- power cord: 200cm

- manufacturer: Jingye
- manufacturer code: JY-9600DX
- trade name: Nose Pump 3