About the HBL filter:
HBL canister filters have been designed for the best possible filtration, thanks to their large volume. At the same time, the filter's design allows it to be placed outside the tank, on the edge of the glass, thereby saving space in the aquarium, in the cabinet, or under the aquarium. Such features of the filter greatly surpass internal, cascade, and standard external filters. They provide better filtration than internal and cascade filters and are easier to operate and do not take up as much space as standard external filters.
5 baskets and filtration in the HBL filter:
The filter has five baskets for loose or sponge filter media. Each basket is separated by a special micro-fabric that supports biological and mechanical filtration. The baskets greatly facilitate the maintenance of the filter, replacement of inserts, and their regeneration.
The media baskets provide adequate space for any filter insert, such as activated carbon, NEO MEDIA, or Organ-Ex polymers. Chemical and polymer inserts should be selected according to the needs of the aquarium.
Water inlet:
The water inlet to the filter is done via a adjustable length pipe, using three segments. This way, the filter sucks in impurities lying on the bottom, which are a common cause of bottom silt and deterioration of water quality. The inlet has a special screen to prevent the suction of fish, shrimp, etc. You can find the lengths of the pipes in the technical data at the end of the description.
Water outlet:
The water outlet has a telescopic design to easily adjust the height of the outlet to the water level of the aquarium. The outlet has two interchangeable tips. The flattened outlet tip (similar to loc-line) perfectly creates the right water movement and has a ball joint allowing the stream to be directed in any direction. The rain bar outlet will be useful for aerating the water and creating a not too strong water movement, which is unnecessary in small aquariums.
Flow regulation:
The filter has smooth, stepless, dual flow regulation, and thus performance. This regulation allows the filter to be adapted to aquariums ranging from 30 to 115 liters in capacity. The valves are located at the inlet and outlet of the filter.
Both the outlet and inlet pipes can be directed in any direction on a horizontal plane at a 360-degree angle. This allows for the placement of the outlet and inlet in any location in the aquarium.
Filter installation:
The filter is placed on the edge of the tank using special brackets. These brackets have an adjustment that allows them to be fitted to glass thicknesses ranging from 4mm to 20mm. A special foot keeps the filter upright. Its construction from flexible and soft rubber perfectly dampens vibrations caused by the operation of the rotor and water flow, making the filter silent.
The filter from SunSun is built on years of experience. It is characterized by reliability and efficient operation. The rotor, which is the heart of the device, is resistant to high resistance from pumped water and also has a shaft made of sintered stainless steel with titanium, allowing the pump to operate in seawater.
I am super flat:
If you want to place the filter behind the aquarium, you only need 10cm!
Technical specifications:
- power consumption 6W pump
- maximum flow 500l/h
- minimum flow 150/h
- dedicated for aquariums from 20l to 90l
- canister dimensions: 95 x 134 x 245 mm (length x width x height)
- length and height of the canister with pipes: length 165mm and height 285mm
- length of the inlet pipe: 13cm, 22cm, and 31cm
- length of the rain bar: 16cm
Trade name: Sunsun Slim Hang Canister S
Manufacturer code: HBL-801
Original product. Production by SUNSUN. Supplied with the manufacturer's packaging.
Polski
English
