The plate allows for the installation of the filter housing in a location convenient for the user.

Teflon tape is used wherever there is a need to tightly screw two elements together. (e.g. precision valve - nipple - solenoid valve or connector - RO filter)

Dimensions: 15m x 19mm x 0.2mm

High-quality osmotic membrane from VONTRON with a nominal capacity of 75 GPD (over 280 liters per day).

The linear bioceramic insert is made of granules of a special ceramic clay subjected to infrared FIR (Far Infra Red - also known as "light of life") radiation, used in medicine for light therapy.

A linear bioceramic insert is granules of special ceramic clay exposed to irradiation with far-infrared (FIR) light rays (also known as "light of life"), used in medicine for light therapies.

RO installation tubing with an external diameter of 6mm. Made of polyethylene, the tubing is also used for connecting water dispensers and ice makers in refrigerators.

In the case of low water pressure in the plumbing system, this pump supports the osmotic membrane in reverse osmosis systems. Ideal for individuals who, due to low water pressure, are unable to achieve satisfactory performance of the entire RO system.

Housing for osmotic membrane. The housing can accommodate any of the typical membranes of any capacity, from any manufacturer.

A linear water softener using ion exchange. Magnesium and calcium ions are exchanged for harmless sodium ions. It is capable of reducing the overall hardness of water even to a level of 0.

Liniowy filtr zmiekczający wodę za pomocą wymiany jonowej. Jony magnezu i wapnia są wymieniane na nieszkodliwe jony sodu. Jest w stanie obniżyć twardość ogólną wody nawet do poziomu 0.

A linear mineralizing filter, designed for use in reverse osmosis filtration systems. Its purpose is to enrich the filtered water with elements necessary for the proper functioning of the human body such as: calcium, sodium, potassium, magnesium, and chloride compounds.

The plate allows for the installation of the filter housing in a location convenient for the user.

Universal key suitable for 10-inch housings.

TDS, or electronic water quality meter, is mainly used in RO/DI filtration systems. It guarantees very accurate readings and constant monitoring of water quality. The externally placed probe can be connected to the tubing at any point (filtration stage). The probe's titanium construction ensures resistance to corrosion and long-lasting performance.

The granular activated carbon insert L-GAC from UST-M has special absorptive properties for volatile organic compounds, improving the taste and odor qualities of water. It is part of Reverse Osmosis Systems. The insert is entirely produced in Poland. The high quality of the filtration bed is confirmed by the PZH certificate.

Flow restrictor (flow restrictor / restrictor). Used in reverse osmosis systems, on the dirty water outflow from the membrane to the drain. Connection via so-called "quick connectors".

Double bracket 2 x 2 inches. Used m.in. in reverse osmosis systems and other water filters. It enables the connection of 2 inch standard inline cartridges - these are mainly carbon filters and water mineralizers.

Water connection used during the connection of a reverse osmosis filter to the water intake.

This is a basic mounting connector, used in virtually every reverse osmosis filter. The 1/4 inch thread is found m.in. in linear filters (inserts) and in osmotic filter housings.

Single bracket for mounting a 2.5-inch diameter membrane housing. Used m.in. in reverse osmosis systems and other water filters.

A linear mechanical filter made from polypropylene foam, which traps contaminants such as sand, rust, silt, and other sediments up to 10 microns in size.

The drain clamp for sewage allows for a quick and easy connection of the dirty water outlet from the RO filter.

A linear mineralizing filter, designed for use in reverse osmosis filtration systems. Its purpose is to enrich the filtered water with elements necessary for the proper functioning of the human body such as: calcium, sodium, potassium, magnesium, and chloride compounds.

A plastic plate allows for the installation of the filter housing in a location convenient for the user.

A Y-shaped tee designed for mounting on a hose with an outer diameter of 6mm for use in reverse osmosis filtration system installations.

Water filter made from high-quality materials that ensure the highest product tightness.

A connector most commonly used to route a hose in places where there is a risk of bending (e.g., a corner of a room), as well as to connect "-Q" standard inline filters terminated with a plug.

A fitting useful when you want to lead the bilge out at a 90 degree angle from, for example, a 10 inch body. Used in virtually every reverse osmosis filter.

Flow restrictor (flow restrictor / restrictor). Used in reverse osmosis systems, on the dirty water outflow from the membrane to the drain. Connection via so-called "quick connectors".

A connector is useful when we want to lead a hose at a 90-degree angle from, for example, an inline filter. It is used in practically every reverse osmosis filter. The 1/8 inch thread is found m.in. in membrane housings.

Flow restrictor (flow restrictor / restrictor). Used in reverse osmosis systems, on the dirty water outflow from the membrane to the drain. Connection via so-called "quick connectors".

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

High-quality water demineralization resin (1l package). Mainly used for water treatment after reverse osmosis filter. Removes anions and cations from water.

A fitting made of plastic designed for mounting on a 6mm diameter RO hose.

The solenoid valve is designed for all types of liquids. Powered by 12V voltage. It has quick connectors 1/4", which are standard 6mm.

The fitting is useful when you want to lead a hose at a 90-degree angle from, for example, an inline filter. Used in practically every reverse osmosis filter. The 1/4 inch thread is found, among others, in linear filters (cartridges) and in the bodies of osmotic filters.

The simplest aquarium osmosis equipped with two prefilters (carbon and sediment). A modern system by UST-M, ensuring clean, soft water free from nitrates and nitrites, chlorine, and many other contaminants.

Clip used to lock the quick-release mechanism.

A reducing connector 1/2 inch female thread to 6 mm hose allows, for example, to connect a filter to a water intake just for the duration of replacement. The 1/2 inch thread fits most shower hose connections.

A T-shaped tee designed for mounting on a hose with an outer diameter of 6mm for use in reverse osmosis filtration system installations.

Ball valve for a 6 mm hose. Connection type: 6 mm quick connectors. Excellent as an additional protection in installations based on 6mm pipes. Used in aquarium reverse osmosis systems to prevent the membrane from drying out, for example, between weekly water changes.

Check valve for water treatment systems for a 6mm pipe. Commonly used at the output of purified water from osmotic membrane. It protects the membrane from uncontrolled water supply from the faucet.

Valve perfectly suitable for connecting an RO filter to a water source. Equipped on one side with a 1/4 inch male thread, and on the other with a compression fitting for a 6mm hose.

High-quality osmotic membrane from the American company Aquafilter Inc. The TFC-75 membrane has a nominal capacity of 75 GPD (over 280 liters per day).

Ishiko plant mineral is a mixture of minerals that creates the ideal environment for aquarium plants and most tropical fish.

Ishiko plant mineral is a mixture of minerals that creates the ideal environment for aquarium plants and most tropical fish.

Aquaforest Demineralization Resin is a high-quality resin intended for the demineralization of water used in reverse osmosis filters primarily as the final stage of tap water purification.

TDS, or electronic water quality meter, is mainly used in RO/DI filtration systems. It guarantees very accurate readings and constant monitoring of water quality. The externally placed probe can be connected to the tubing at any point (filtration stage). The probe's titanium construction ensures resistance to corrosion and long-lasting performance.

TDS, or electronic water quality meter, is mainly used in RO/DI filtration systems. It guarantees very accurate readings and constant monitoring of water quality. The externally placed probe can be connected to the tubing at any point (filtration stage). The probe's titanium construction ensures resistance to corrosion and long-lasting performance.

Standard sediment filter made of polypropylene non-woven fabric, designed to increase the filter density towards the core. It retains all kinds of mechanical impurities such as sand, silt, rust, etc.

A linear demineralizing filter, which, thanks to the presence of cation and anion resins, removes both positive and negative ions from the water, completely demineralizing it. Used as a final filter, it ultimately purifies the water.

Double handle 2 x 2.5 inches. Used m.in. in reverse osmosis systems and other water filters. It allows for the connection of thick 2.5-inch standard linear cartridges and membranes.

Mechanical filtration cartridge made of polypropylene cord. Available in 1, 5, 10, 20, and 50 µm micron rating. Mainly used as the first stage of filtration of aquarium water, drinking water and general water.

Tubing for RO installation with an outer diameter of 6mm. Made of polyethylene, the tubing is also used for connecting water dispensers and ice makers in refrigerators.

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

A complete set for water demineralization, connected at the output of the reverse osmosis filter. Depending on the level of contamination of the input water, it is possible to obtain water with zero conductivity.

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

Switching valve (four-way, two-way) for reverse osmosis. The connection of the tubes is made without the need for tools - push-fit. The seal is automatic, on the built-in valve o-rings (quick-connect mechanism).

Single holder for inline filters with a 2-inch diameter. Used, among others, in reverse osmosis systems and other water filters.

An RO filter perfectly combines the ability to easily use purified water for food purposes as well as for aquariums. The set includes a canister with a built-in membrane, thanks to which we can use clean, filtered water at any time. 

The highest quality osmotic membrane for RO filters. A product of the Polish company UST-M made from materials by Filmtec, a leading manufacturer of osmotic membranes. Recommended for professional reverse osmosis systems. Very high quality of construction and water conditioning.

Intelligent system comprehensively handling the RO filter. It starts and stops the production of pure water according to the minimum and maximum set by the user. Optical sensors constantly monitor the appropriate water level, and each of them has a double "eye". Additionally, a standard float and an intelligent electronic security system protect against overflow.

The highest quality osmotic membrane for RO filters. A product of the Polish company UST-M made from materials by Filmtec, a leading manufacturer of osmotic membranes. Recommended for professional reverse osmosis systems. Very high quality of construction and water conditioning.

A linear mechanical filter made from polypropylene foam, which traps contaminants such as sand, rust, silt, and other sediments up to 10 microns in size.

Granular activated carbon insert, designed for RO filters, has special absorptive properties of volatile organic compounds, improving the taste and odor qualities of water.

An advanced aquarium reverse osmosis filter with expanded prefiltration and valves protecting the membrane from drying out. A modern system from UST-M, guaranteeing clean, soft water, free of nitrates and nitrites, chlorine, and many other contaminants.

Insert made of sintered activated carbon from coconut shell with a filtration capability up to 10 microns. Exceptionally useful in removing chlorine and its derivatives, organic compounds, and heavy metals. Eliminates bad taste and odor in water. Its advantage is the low drop in water pressure flowing through the insert.

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

A linear demineralizing filter, which, thanks to the presence of cation and anion resins, removes both positive and negative ions from the water, completely demineralizing it. Used as a final filter, it ultimately purifies the water.

Dual bracket 2 x 2.5 inches. Used m.in. in reverse osmosis systems and other water filters. Allows the connection of the membrane housing with inline cartridges - these are mainly carbon filters and water mineralizers.

An empty cartridge into which any filtration medium can be poured and placed in a 10-inch housing.

The simplest 4-stage aquarium osmosis system ready for installation. The filter is designed for marine and freshwater aquaristics. A modern system that guarantees clean, soft water free from nitrates and nitrites, chlorine, and many other contaminants.

High quality osmotic membrane from the American company Aquafilter Inc. TFC-100 membrane with a nominal capacity of 100 GPD (approximately 370 liters per day).

High-quality osmotic membrane from Kensen with a nominal output of 100 GPD (over 370 liters per day).