A small and handy TDS Pen meter, which allows you to quickly check water contamination in any situation. Additionally equipped with a temperature sensor and a reading lock function.

A small and handy TDS meter and EC conductivity meter, which allows you to quickly check water contamination in any situation. Additionally equipped with a temperature sensor and a reading hold function.

TDS, or electronic water quality meter, is mainly used in RO/DI filtration systems. It guarantees very accurate readings and constant monitoring of water quality. The externally placed probe can be connected to the tubing at any point (filtration stage). The probe's titanium construction ensures resistance to corrosion and long-lasting performance.

Chihiros TDS is a small and handy meter that allows us to quickly measure water contamination at any time. Additionally, it is equipped with a temperature sensor.

Teflon tape is used wherever there is a need to tightly screw two elements together. (e.g. precision valve - nipple - solenoid valve or connector - RO filter)

Dimensions: 15m x 19mm x 0.2mm

Teflon tape is used wherever there is a need to tightly screw two elements together. (e.g. precision valve - nipple - solenoid valve or connector - RO filter)

Dimensions: 15m x 12mm x 0.2 mm

The body fits all 10-inch inserts and has a standard 1/4-inch threaded entry.

High-quality osmotic membrane from VONTRON with a nominal capacity of 75 GPD (over 280 liters per day).

RO installation tubing with an external diameter of 6mm. Made of polyethylene, the tubing is also used for connecting water dispensers and ice makers in refrigerators.

In the case of low water pressure in the plumbing system, this pump supports the osmotic membrane in reverse osmosis systems. Ideal for individuals who, due to low water pressure, are unable to achieve satisfactory performance of the entire RO system.

A linear bioceramic insert is granules of special ceramic clay exposed to irradiation with far-infrared (FIR) light rays (also known as "light of life"), used in medicine for light therapies.

The linear bioceramic insert is made of granules of a special ceramic clay subjected to infrared FIR (Far Infra Red - also known as "light of life") radiation, used in medicine for light therapy.

Housing for osmotic membrane. The housing can accommodate any of the typical membranes of any capacity, from any manufacturer.

Double bracket 2 x 2 inches. Used m.in. in reverse osmosis systems and other water filters. It enables the connection of 2 inch standard inline cartridges - these are mainly carbon filters and water mineralizers.

Water connection used during the connection of a reverse osmosis filter to the water intake.

Flow restrictor (flow restrictor / restrictor). Used in reverse osmosis systems, on the dirty water outflow from the membrane to the drain. Connection via so-called "quick connectors".

The plate allows for the installation of the filter housing in a location convenient for the user.

Single bracket for mounting a 2.5-inch diameter membrane housing. Used m.in. in reverse osmosis systems and other water filters.

A linear water softener using ion exchange. Magnesium and calcium ions are exchanged for harmless sodium ions. It is capable of reducing the overall hardness of water even to a level of 0.

Liniowy filtr zmiekczający wodę za pomocą wymiany jonowej. Jony magnezu i wapnia są wymieniane na nieszkodliwe jony sodu. Jest w stanie obniżyć twardość ogólną wody nawet do poziomu 0.

A linear mineralizing filter, designed for use in reverse osmosis filtration systems. Its purpose is to enrich the filtered water with elements necessary for the proper functioning of the human body such as: calcium, sodium, potassium, magnesium, and chloride compounds.

The granular activated carbon insert L-GAC from UST-M has special absorptive properties for volatile organic compounds, improving the taste and odor qualities of water. It is part of Reverse Osmosis Systems. The insert is entirely produced in Poland. The high quality of the filtration bed is confirmed by the PZH certificate.

The plate allows for the installation of the filter housing in a location convenient for the user.

Universal key suitable for 10-inch housings.

The drain clamp for sewage allows for a quick and easy connection of the dirty water outlet from the RO filter.

A linear mechanical filter made from polypropylene foam, which traps contaminants such as sand, rust, silt, and other sediments up to 10 microns in size.

A Y-shaped tee designed for mounting on a hose with an outer diameter of 6mm for use in reverse osmosis filtration system installations.

This is a basic mounting connector, used in virtually every reverse osmosis filter. The 1/4 inch thread is found m.in. in linear filters (inserts) and in osmotic filter housings.

A connector most commonly used to route a hose in places where there is a risk of bending (e.g., a corner of a room), as well as to connect "-Q" standard inline filters terminated with a plug.

Clip used to lock the quick-release mechanism.

A linear mineralizing filter, designed for use in reverse osmosis filtration systems. Its purpose is to enrich the filtered water with elements necessary for the proper functioning of the human body such as: calcium, sodium, potassium, magnesium, and chloride compounds.

Water filter made from high-quality materials that ensure the highest product tightness.

The fitting is useful when you want to lead a hose at a 90-degree angle from, for example, an inline filter. Used in practically every reverse osmosis filter. The 1/4 inch thread is found, among others, in linear filters (cartridges) and in the bodies of osmotic filters.

A fitting useful when you want to lead the bilge out at a 90 degree angle from, for example, a 10 inch body. Used in virtually every reverse osmosis filter.

High-quality water demineralization resin (1l package). Mainly used for water treatment after reverse osmosis filter. Removes anions and cations from water.

A connector is useful when we want to lead a hose at a 90-degree angle from, for example, an inline filter. It is used in practically every reverse osmosis filter. The 1/8 inch thread is found m.in. in membrane housings.

Flow restrictor (flow restrictor / restrictor). Used in reverse osmosis systems, on the dirty water outflow from the membrane to the drain. Connection via so-called "quick connectors".

A fitting made of plastic designed for mounting on a 6mm diameter RO hose.

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

Flow restrictor (flow restrictor / restrictor). Used in reverse osmosis systems, on the dirty water outflow from the membrane to the drain. Connection via so-called "quick connectors".

A plastic plate allows for the installation of the filter housing in a location convenient for the user.

The simplest aquarium osmosis equipped with two prefilters (carbon and sediment). A modern system by UST-M, ensuring clean, soft water free from nitrates and nitrites, chlorine, and many other contaminants.

A T-shaped tee designed for mounting on a hose with an outer diameter of 6mm for use in reverse osmosis filtration system installations.

A reducing connector 1/2 inch female thread to 6 mm hose allows, for example, to connect a filter to a water intake just for the duration of replacement. The 1/2 inch thread fits most shower hose connections.

Ball valve for a 6 mm hose. Connection type: 6 mm quick connectors. Excellent as an additional protection in installations based on 6mm pipes. Used in aquarium reverse osmosis systems to prevent the membrane from drying out, for example, between weekly water changes.

High-quality osmotic membrane from the American company Aquafilter Inc. The TFC-75 membrane has a nominal capacity of 75 GPD (over 280 liters per day).

Valve perfectly suitable for connecting an RO filter to a water source. Equipped on one side with a 1/4 inch male thread, and on the other with a compression fitting for a 6mm hose.

Check valve for water treatment systems for a 6mm pipe. Commonly used at the output of purified water from osmotic membrane. It protects the membrane from uncontrolled water supply from the faucet.

High-quality non-acidic technical vaseline intended for use in aquaristics, including for lubricating seals in filter housings or O-rings of the osmotic membrane.

TDS, or electronic water quality meter, is mainly used in RO/DI filtration systems. It guarantees very accurate readings and constant monitoring of water quality. The externally placed probe can be connected to the tubing at any point (filtration stage). The probe's titanium construction ensures resistance to corrosion and long-lasting performance.

TDS, or electronic water quality meter, is mainly used in RO/DI filtration systems. It guarantees very accurate readings and constant monitoring of water quality. The externally placed probe can be connected to the tubing at any point (filtration stage). The probe's titanium construction ensures resistance to corrosion and long-lasting performance.

Dual holder 2.5 x 2.5 inches. Used m.in. in reverse osmosis systems and other water filters. It allows for the connection of standard 2.5-inch linear cartridges - these are mainly carbon filters and water remineralizers.

Tubing for RO installation with an outer diameter of 6mm. Made of polyethylene, the tubing is also used for connecting water dispensers and ice makers in refrigerators.

Double handle 2 x 2.5 inches. Used m.in. in reverse osmosis systems and other water filters. It allows for the connection of thick 2.5-inch standard linear cartridges and membranes.

Standard sediment filter made of polypropylene non-woven fabric, designed to increase the filter density towards the core. It retains all kinds of mechanical impurities such as sand, silt, rust, etc.

Mechanical filtration cartridge made of polypropylene cord. Available in 1, 5, 10, 20, and 50 µm micron rating. Mainly used as the first stage of filtration of aquarium water, drinking water and general water.

A linear demineralizing filter, which, thanks to the presence of cation and anion resins, removes both positive and negative ions from the water, completely demineralizing it. Used as a final filter, it ultimately purifies the water.

Single holder for inline filters with a 2-inch diameter. Used, among others, in reverse osmosis systems and other water filters.

Switching valve (four-way, two-way) for reverse osmosis. The connection of the tubes is made without the need for tools - push-fit. The seal is automatic, on the built-in valve o-rings (quick-connect mechanism).

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

A complete set for water demineralization, connected at the output of the reverse osmosis filter. Depending on the level of contamination of the input water, it is possible to obtain water with zero conductivity.

Dual bracket 2 x 2.5 inches. Used m.in. in reverse osmosis systems and other water filters. Allows the connection of the membrane housing with inline cartridges - these are mainly carbon filters and water mineralizers.

The highest quality osmotic membrane for RO filters. A product of the Polish company UST-M made from materials by Filmtec, a leading manufacturer of osmotic membranes. Recommended for professional reverse osmosis systems. Very high quality of construction and water conditioning.

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

The highest quality osmotic membrane for RO filters. A product of the Polish company UST-M made from materials by Filmtec, a leading manufacturer of osmotic membranes. Recommended for professional reverse osmosis systems. Very high quality of construction and water conditioning.

Granular activated carbon insert, designed for RO filters, has special absorptive properties of volatile organic compounds, improving the taste and odor qualities of water.

A linear mechanical filter made from polypropylene foam, which traps contaminants such as sand, rust, silt, and other sediments up to 10 microns in size.

A linear demineralizing filter, which, thanks to the presence of cation and anion resins, removes both positive and negative ions from the water, completely demineralizing it. Used as a final filter, it ultimately purifies the water.

Insert made of sintered activated carbon from coconut shell with a filtration capability up to 10 microns. Exceptionally useful in removing chlorine and its derivatives, organic compounds, and heavy metals. Eliminates bad taste and odor in water. Its advantage is the low drop in water pressure flowing through the insert.

Standard sediment insert made of polypropylene nonwoven, shaped to increase the filter density towards the core. It captures all kinds of mechanical impurities such as sand, silt, rust, etc.

An empty cartridge into which any filtration medium can be poured and placed in a 10-inch housing.

The simplest 4-stage aquarium osmosis system ready for installation. The filter is designed for marine and freshwater aquaristics. A modern system that guarantees clean, soft water free from nitrates and nitrites, chlorine, and many other contaminants.

High quality osmotic membrane from the American company Aquafilter Inc. TFC-100 membrane with a nominal capacity of 100 GPD (approximately 370 liters per day).

High-quality osmotic membrane from Kensen with a nominal output of 100 GPD (over 370 liters per day).