Taking care of the appropriate water parameters is one of the main tasks of every aquarist. To create the best possible conditions for the flora and fauna living in the aquarium, it is necessary to check the state of the water, both that which is already in the aquarium, that which has been prepared for replacement, and that which comes from our tap. Each of these tasks can be performed easily using dedicated water tests. You will find not only individual tests for the aquarium but also comprehensive aquarium test kits that will allow you to check multiple parameters at once.
Active filters
A small and handy TDS Pen meter, which allows you to quickly check water contamination in any situation. Additionally equipped with a temperature sensor and a reading lock function.
A small and handy TDS meter and EC conductivity meter, which allows you to quickly check water contamination in any situation. Additionally equipped with a temperature sensor and a reading hold function.
Chihiros TDS is a small and handy meter that allows us to quickly measure water contamination at any time. Additionally, it is equipped with a temperature sensor.
Test to measure pH parameter in the range of 7.4-9.0 with an accuracy of 0.2. Suitable for use in both freshwater and saltwater tanks. The set also includes a comparison scale to help narrow down the results obtained.
Reagent set for the KH/GH test by Zoolek.
Aquatest Ca-Mg is used for the quick and accurate measurement of calcium, magnesium, and general hardness content in freshwater.
Test that allows to measure the concentration of iron cations in aquarium water in the range of 0-1.5mg/l. The content is sufficient for performing 30 tests.
The reagent kit is a Hanna phosphate meter. The kit includes 25 pieces.
A handy suitcase containing a set of ten tests.
A test that allows for the measurement of phosphate levels (PO4) in aquarium water. The kit enables the performance of 30 tests. Suitable for use in both freshwater and saltwater tanks.
An electronic pH tester is a device that allows for quick and precise determination of this important parameter in an aquarium. Thanks to its compact dimensions and battery power, this device can always be at hand and ready to use. Unlike droplet tests, measurement and obtaining results is immediate and is not preceded by a complicated procedure.
Test that allows for measuring the content of nitrites (NO2) in both freshwater and saltwater aquariums in the range of 0-1.5mg/l. The content is sufficient for conducting 50 tests.
Test that measures the carbonate hardness (TwW) and total hardness (TwO) in the tank. Results are obtained in German degrees of hardness (°n). The content allows for the determination of approximately 2x300°n GH and KH.
Test to determine the content of potassium (K) in freshwater aquariums in the range of 3-25 mg/l. The contents are sufficient for approximately 50 tests.
Test that allows for measuring the pH level in aquarium water in two ranges: general 4.5-9.0 (accuracy up to 0.5) and narrow 6.0-8.0 (with an accuracy of 0.2). The kit allows for performing 2x100 tests
Reagents and reagents kit for the JBL NO2 test.
Seachem pH Alert is an innovative and unique measuring device that is placed in an aquarium or filter to continuously monitor the pH level. This small and aesthetic test is designed for freshwater tanks.
Seachem Ammonia Alert is a unique and innovative measuring device used to monitor the levels of toxic ammonia in a tank. Its small, discreet size is perfectly suited for use in both saltwater and freshwater tanks.
Test for measuring nitrate (NO3) concentration in aquarium water in the range of 0-150mg/l. The kit allows for 50 tests.
A test that allows for the measurement of nitrate (NO3) levels in aquarium water. Tests by JBL are among the most accurate on the market, ensuring reliable results.
JBL Combi Set is a practical set of aquarium tests housed in a convenient case. These tests allow you to determine the values of parameters such as pH, KH, NO2, NO3, Fe. Additionally, a table for converting the CO2 level contained in the water is included. Controlling these parameters is fundamental and key to maintaining the nice appearance of plants and the good condition of aquarium inhabitants.
Simple and safe control of water parameters in the aquarium. The set allows for precise measurements of the most important values, such as: pH value, carbonate hardness, carbon dioxide content, iron, magnesium, potassium, phosphate, silicate, and nitrates.
Tetra Test AlgaeControl 3in1 is an optimal way to prevent the growth of algae in ponds and aquariums. Measuring the content of nitrates and phosphates in water facilitates control over the most important parameters of algae present in the water. Carbonate hardness is also measured and is very important for ensuring stable water parameters, preventing sudden drops in acidity.
Reagents and reagents kit for the JBL Fe test.
Reagents and reagents set for the JBL K. test.
Supplement for the rapid determination of CO2/Ph concentration test
Reagents and reagents kit for the JBL KH test.
Test allowing to measure the concentration of phosphates (PO4) in aquarium water. Tests by JBL are among the most accurate on the market, which guarantees us a correct result.
Droplet test by JBL designed to measure the calcium level in marine aquarium water.
A test that measures the overall hardness in the tank. JBL tests are among the most accurate on the market, providing us with a guarantee of correct results.
Complete set of aquarium water tests in strips. It allows for a quick determination of important water parameters such as: NO2, NO3, GH, KH, pH, Cl2, and CO2. The set includes as many as 50 strips with all the tests.
Simple and safe control of water parameters in a freshwater aquarium - water analysis using a smartphone. Supplementary test strips.
Droplet test by JBL designed for measuring potassium levels in aquarium water.
Test allowing the measurement of ammonia (NH4) concentration in aquarium water. Tests from JBL are among the most accurate on the market, guaranteeing correct results.
A test that allows you to check the pH value in aquarium water. Tests by JBL are among the most accurate on the market, which guarantees a correct result.
A test that allows for the measurement of iron concentration in aquarium water. The tests by JBL are among the most accurate on the market, ensuring reliable results.
Test allowing for the measurement of carbonate hardness prevailing in the tank. Tests from JBL are among the most accurate on the market, which guarantees us a correct result.
Test allowing for continuous measurement of carbon dioxide content in water.
Using the test, we will determine the content of silicates in freshwater and marine aquariums.
Determination of copper content for the control of heavy metals in freshwater and seawater.
The drop test from the brand JBL is designed to measure the potassium level in aquarium water. It determines the optimal pH content in freshwater and saltwater.
Test allowing to examine the concentration of nitrites (NO2) in aquarium water. Tests by JBL are among the most accurate on the market, giving us a guarantee of correct results.
Quick test to determine the oxygen content in freshwater and marine aquariums as well as garden ponds
Test designed to measure the level of copper in the range of 0-2.5mg/l in freshwater and saltwater aquariums. It is particularly useful when using copper-containing preparations, for example: against algae or protozoa. The content allows for about 40 tests to be conducted.
Test used to determine the magnesium level in saltwater tanks. This element is extremely important for the development of invertebrates, while the biological and chemical processes occurring in the aquarium cause constant depletion of this element.
JBL Test Pro Ca Calcium is a professional test kit designed for precise measurement of calcium levels in aquarium water.
JBL Test pH 6.0 - 7.6 is a precise supplement kit that allows for accurate measurement of pH values in freshwater, ranging from 6.0 to 7.6.
A handy suitcase containing a set of nine tests.
Reagents and reagents kit for the JBL GH test.
Reagents and reagents kit for the JBL NH4 test.
Simple and safe analysis of freshwater parameters using a smartphone. ProScan enables precise measurement of the following values: total hardness, carbonate hardness, pH value, nitrites, nitrates, chlorine, and carbon dioxide content.
Test that quickly and easily checks water quality in 60 seconds: it measures pH, carbonate hardness (KH), general hardness (GH), nitrite level (NO2-), nitrate level (NO3-), and chlorine (Cl2).
The droplet test by JBL is designed to measure the magnesium level in aquarium water.
Automatic stirrer for aquarium tests. The product will quickly become an indispensable aid for every aquarist. Smart Stir guarantees precise and fast drop tests, saving you time and mixing the contents of the test tube for you.
Supplement for the rapid determination of phosphate concentration test.
Test allowing to measure the concentration of nitrites (NO2) in aquarium water. Tests by JBL are among the most accurate on the market, which guarantees a correct result.
Test allowing for the examination of PH values in aquarium water. Tests from JBL are among the most accurate on the market, which guarantees us a correct result.
Cookies
Polski
English
